Heat pump for whirlpools, swim spa pools. Rapid Inverter 6.5kw
€1.106,96
Description
Inverter heat pump; Color: Black – Aluminum ; Digital Display: Yes; Heat output: 6.5kW; Cooling: Yes; Cooling power: 3kW; Recommended pool volume: 15-30 m3; Connection: 50 mm; Defrosting: Yes; Rated power: 0.13-1.06 kW; Used refrigerant: R32 ; Voltage: 230V; Efficiency: 14,7 C.O.P.
The WI-FI module is integrated into the heat pump and does not need to be purchased.
Rapid Inverter is a fully inverter heat pump. It is equipped with an inverter compressor and a fan motor, thanks to which it is possible to smoothly correct the power consumption and speed of the fan. Thanks to this, the pool is intelligently heated with maximum efficiency. The Rapid Inverter heat pump is automatically adjusted to a power of 25% to 100% according to the current heating needs. Most of the time, it only runs at medium or low speed, which maximizes efficiency.
When the Rapid Inverter runs at medium or low speed to maintain the pool temperature, the compressor noise is extremely low. Depending on the size of the pool, the Rapid Inverter has a COP efficiency of up to 15.8 (at an air temperature of 26°C, water of 26°C and an air humidity of 80%)
Energy saving – up to 2x cheaper operation compared to a conventional heat pump
Cooling power: 3.0 kW
Newly, these heat pumps have the R32 refrigerant.
Technical parameters
| Product Type: | Inverter heat pump |
|---|---|
| Color: | Black – Aluminum |
| Digital display: | Yes |
| Heat output: | 6.5 kW |
| Cooling: | Yes |
| Cooling performance: | 3 kW |
| Recommended pool volume: | 15-30 m3 |
| Connection: | 50 mm |
| Defrosting: | Yes |
| Rated power: | 0.13-1.06 kW |
| Refrigerant used: | R32 |
| Tension: | 230 V |
| Effectiveness: | 14.7 C.O.P. |
| For salt water up to 5 g/l (<0.5%): | Yes |
| For salt water above 5 g/l (>0.5%): | Yes |
| Net/transport weight kg: | 42 kg |
| Net dimensions of the unit (w/l/h): | 894×359×648 mm |
| Fan orientation: | horizontal horizontal |
| Operating temperature: | -7 to 43 °C |
| Flow monitoring: | Yes |
| For seawater: | Yes |
| Easy installation: | Yes |
| Rated current: | 0.56-4.6 A |
| Recommended water flow: | 2-4 m3/h |
